A two-stroke engine- paul-ryan.info Cylinder head Carburettor Suppliesfuel/air/oil mixture toengine. Lubricatingoil can be fedseparately instead. Inlet ports Lead to thecrankcase, whereinitial compressiontakes place. Bearings Ball or needle rollertypes are used asthey can run in an oilmist. Crankshaft Transfer ports Lead the intakemixture from thecrankcase to thetop of the cylinderafter crankcasecompression. Watercoolingjacket Pistons Sometimes havecut-outs to let theinlet chargethrough. They can beshaped on top tocontrol inlet andexhaust flow. Exhaust Ports and pipe must beaccurately designed to helpcontrol the flow of exhaustand inlet gases.
Download

Most two-stroke engines are of the crankcase compression type. The fuel/ air mixture is fed into the crankcase through the side of the piston from an inlet manifold mounted low down on the cylinder. The mixture is slightly compressed in the crankcase then transferred to the top of the cylinders, compressed and ignited so that the burning gases expand to drive the pistons down.

Lubricating oil is mixed with the fuel or injected separately. Because the crankshaft bearings are not pressure-fed with oil, they are of the ball or needle-roller bearing type which can operate in an oil mist.

Appears in