4. Wiring the lights- paul-ryan.info
Download

Drill a hole and fit a grommet where the feed wire passes through the body. Connect the wire to the light unit. If two lights are fitted, splice an extra wire in to the feed wire from the gearbox switch using a Scotchlok connector. Connect this wire to the second light unit. Reconnect the battery and test.

Appears in

Adding reversing lights

Reversing is one of the most difficult manoeuvres you can perform with your car, especially at n...

http://avtomaticheskij-poliv.com.ua/

http://avtomaticheskij-poliv.kiev.ua

pelican coolers colors